manualshive.com logo in svg

D-Link DWS-1008, Cli Reference Manual, Page: 104 / 531

Share
Download
D-Link DWS-1008 Cli Reference Manual Download Page 104

D-Link DWS-1008 CLI Manual

101

Examples: The following command configures a switch to use NTP server 192.168.1.5:

  

DWS-1008# 

set ntp server 192.168.1.5

See Also:
• clear ntp server
• clear ntp update-interval
• set ntp
• set ntp update-interval
• show ntp 

set ntp update-interval

Changes how often MSS sends queries to the NTP servers for updates.

Syntax: set ntp update-interval 

seconds

 

seconds

  

Number of seconds between queries. You can specify from 16 through 1024  

 

  

 

seconds. 

Defaults: The default NTP update interval is 64 seconds.

Access: Enabled.

Examples: The following command changes the NTP update interval to 128 seconds:

  

DWS-1008# 

set ntp update-interval 128

  

success: change accepted.

See Also:
• clear ntp server
• clear ntp update-interval
• set ntp
• set ntp server
• show ntp

Summary of Contents for DWS-1008




















































































































































































































































































































































































































































































































































Reviews:

No comments