D-Link DWS-1008 CLI Manual
01
Defaults: None.
Access: Enabled.
Usage: To change the value of an attribute, enter set mac-user attr with the new value. To delete
an attribute, use
clear mac-user attr.
You can assign attributes to individual MAC users and to MAC user groups. If attributes are
configured for a MAC user and also for the group the MAC user is in, the attributes assigned to
the individual MAC user take precedence for that user. For example, if the start-date attribute
configured for a MAC user is sooner than the start-date configured for the MAC user group the
user is in, the MAC user’s network access can begin as soon as the user start-date. The MAC
user does not need to wait for the MAC user group’s start date.
Attribute
Description
Valid Value(s)
encryption-type
Type of encryption required for access by
the client. Clients who attempt to use an
unauthorized encryption method are rejected.
Note: Encryption-Type is a D-Link vendor-
specific attribute (VSA). The vendor ID is 14525,
and the vendor type is 3.
One of the following numbers that identifies an
encryption algorithm:
• 1—AES_CCM (Advanced Encryption
Standard using Counter with CBC-MAC)
• 2—Reserved
• 4—TKIP (Temporal Key Integrity Protocol)
• 8—WEP_104 (the default) (Wired-
Equivalent Privacy protocol using 104 bits
of key strength)
• 16—WEP_40 (Wired-Equivalent Privacy
protocol using 40 bits of key strength)
• 32—NONE (no encryption)
• 64—Static WEP In addition to these
values, you can specify a sum of them for
a combination of allowed encryption types.
For example, to specify WEP_104 and
WEP_40, use 24.
end-date
Date and time after which the user is no longer
allowed to be on the network.
Date and time, in the following format:
YY/MM/DD-HH:MM Y
You can use end-date alone or with start-date.
You also can use start-date, end-date, or both
in conjunction with time-of-day.
Summary of Contents for DWS-1008
Page 1: ......
Page 27: ...D Link DWS 1008 CLI Manual 24 ...
