D-Link DWS-1008 CLI Manual
1
weekday
Day of the week to start or end the time change. Valid values are sun,
mon, tue, wed, thu, fri, and sat.
month
Month of the year to start or end the time change. Valid values are jan, feb,
mar, apr, may, jun, jul, aug, sep, oct, nov, and dec.
hour
Hour to start or end the time change—a value between 0 and 23 on the
24-hour clock.
min
Minute to start or end the time change—a value between 0 and 59.
end
End of the time change period.
Defaults: If you do not specify a start and end time, the system implements the time change
starting at 2:00 a.m. on the first Sunday in April and ending at 2:00 a.m. on the last Sunday in
October, according to the North American standard.
Access: Enabled.
Usage: You must first set the time zone with the set timezone command for the offset to work
properly without the start and end values. Configure summertime before you set the time and
date. Otherwise, summertime’s adjustment of the time will make the time incorrect, if the date is
within the summertime period.
Examples: To enable summertime and set the summertime time zone to PDT (Pacific Daylight
Time), type the following command:
DWS-1008#
set summertime PDT
success: change accepted
See Also:
• clear summertime
• clear timezone
• set timedate
• set timezone
• show summertime
• show timedate
• show timezone
Summary of Contents for DWS-1008
Page 1: ......
Page 27: ...D Link DWS 1008 CLI Manual 24 ...
