D-Link DWS-1008 CLI Manual
Examples: The following command configures the channel on the 802.11a radio on the
DWL-8220AP access point connected to port 5:
DWS-1008#
set ap 5 radio 1 channel 36
success: change accepted.
The following command configures the channel and transmit power on the 802.11b/g radio on the
DWL-8220AP access point connected to port 2:
DWS-1008#
set ap 2 radio 1 channel 1 tx-power 10
success: change accepted.
See Also:
• set {ap | dap} radio tx-power
• show {ap | dap} config
set {ap | dap} radio mode
Enables or disables a radio on a DWL-8220AP access point.
Syntax: set {ap
port-list
| dap {
dap-num
| auto}} radio {1 | 2} mode {enable | disable}
ap
port-list
dap
dap-num
dap auto
radio 1
radio 2
enable
disable
Defaults: DWL-8220AP access point radios are disabled by default.
Access: Enabled.
List of ports connected to the DWL-8220AP access point(s) on which
to turn a radio on or off.
Number of a Distributed AP on which to turn a radio on or off.
Sets the radio mode for DWL-8220APs managed by the DWL-8220AP
configuration template.
Radio 1 of the DWL-8220AP.
Radio 2 of the DWL-8220AP.
Enables a radio.
Disables a radio.
Summary of Contents for DWS-1008
Page 1: ......
Page 27: ...D Link DWS 1008 CLI Manual 24 ...
