D-Link DVG-5402G User Manual Download Page 292

Page: 292 / 311

DVG-5402G/GF

Wireless AC1200 MU-MIMO Dual Band

Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port

User Manual

Configuring via Web-based Interface

Telnet/SSH

On the

System / Telnet/SSH

page, you can enable or disable access to the device settings via

TELNET and/or SSH from your LAN. By default, access is disabled.

Figure 219. The

System / Telnet/SSH

page.

To enable access via TELNET and/or SSH, move the

Enable Telnet

switch and/or

Enable SSH

switch to the right. In the

Port

field, enter the number of the arouter’s port through which access

will be allowed (by default, the port

is specified for Telnet and the port

is specified for SSH).

Then click the

APPLY

button.

To disable access via TELNET and/or SSH again, move the

Enable Telnet

switch and/or

Enable

SSH

switch to the left and click the

APPLY

button.

Page

292

of 311

Summary of Contents for DVG-5402G
























































































































































































































































































































Search results

Summary of Contents for DVG-5402G

Reviews:

Related manuals for DVG-5402G

Brands by name

Popular brands

D-Link DVG-5402G, User Manual

Search results

Summary of Contents for DVG-5402G

Reviews:

Related manuals for DVG-5402G

Brands by name

Popular brands