D-Link DVG-5402G User Manual Download Page 194

Page: 194 / 311

DVG-5402G/GF

Wireless AC1200 MU-MIMO Dual Band

Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port

User Manual

Configuring via Web-based Interface

SMS

When a new text message is received, the relevant notification will be displayed in the top right
corner of the page.

Figure 148 The notification on a new text message.

Click the

CHECK

button. After clicking the button, the

USB Modem / SMS

page opens.

On the

USB Modem / Modem name / SMS

page, you can create and send a text message and

also view the history of sent and received messages stored in the memory of the SIM card.

Figure 149. The

USB Modem / Modem name / SMS

page. The

SMS

tab.

To view all outgoing and incoming messages on the

SMS

tab, select the relevant value from the

Message filter

drop-down list.

To view the latest data on sent and received messages, click the

REFRESH

button.

Page

194

of 311

Summary of Contents for DVG-5402G
























































































































































































































































































































Search results

Summary of Contents for DVG-5402G

Reviews:

Related manuals for DVG-5402G

Brands by name

Popular brands

D-Link DVG-5402G, User Manual

Search results

Summary of Contents for DVG-5402G

Reviews:

Related manuals for DVG-5402G

Brands by name

Popular brands