D-Link DVG-5402G User Manual Download Page 224

Page: 224 / 311

DVG-5402G/GF

Wireless AC1200 MU-MIMO Dual Band

Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port

User Manual

Configuring via Web-based Interface

VoIP

In this menu you can configure all parameters essential for VoIP via SIP and specify all needed
settings for the phones connected to the router.

Home

On the

VoIP / Home

page you can enable VoIP and manage profiles.

Figure 174. The

VoIP / Home

page.

To enable VoIP, move the

Enable VoIP

switch to the right. You can specify the following

parameters:

Parameter

Description

Interface type

The type of network interface for VoIP. Select the needed value from
the drop-down list.

•

Connection

The selected WAN connection serves as the

interface for VoIP.

•

WAN group

: A WAN group is used as the interface for

VoIP. The router chooses an interface from the group of
interfaces based on the routing table.

Page

224

of 311

Summary of Contents for DVG-5402G
























































































































































































































































































































Search results

Summary of Contents for DVG-5402G

Reviews:

D-Link DVG-5402G, User Manual, Page: 224 / 311

Search results

Summary of Contents for DVG-5402G

Reviews: