D-Link DVG-5402G User Manual Download Page 200

Page: 200 / 311

DVG-5402G/GF

Wireless AC1200 MU-MIMO Dual Band

Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port

User Manual

Configuring via Web-based Interface

Parameter

Description

Type

Select a type for the port included in this VLAN.

•

Untagged

: Untagged traffic will be transmitted through the

specified port

. The WAN port of the router can be included

in several VLANs as an untagged port.

•

Tagged

: Tagged traffic will be transmitted through the

specified port

Leave the

Excluded

value for the ports not included in the VLAN.

Click the

APPLY

button.

To edit an existing VLAN, select the relevant line in the table. On the page displayed, change the
parameters and click the

APPLY

button.

To remove an existing VLAN, select the checkbox located to the left of the relevant line in the table

and click the

DELETE

button (

Connection with the router may be interrupted, if you delete the VLAN that includes the
device port used to access the web-based interface of the router.

After specifying the needed VLAN parameters, go to the

Connections Setup / WAN

page to

create the required connections, then to the

Advanced

/ Interface Grouping

page to group the

created VLANS with the needed interfaces and WAN connections of the router for distinguishing
different types of traffic

Page

200

of 311

Summary of Contents for DVG-5402G
























































































































































































































































































































Search results

Summary of Contents for DVG-5402G

Reviews:

Related manuals for DVG-5402G

Brands by name

Popular brands

D-Link DVG-5402G, User Manual

Search results

Summary of Contents for DVG-5402G

Reviews:

Related manuals for DVG-5402G

Brands by name

Popular brands