D-Link DVG-5402G User Manual Download Page 248

Page: 248 / 311

DVG-5402G/GF

Wireless AC1200 MU-MIMO Dual Band

Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port

User Manual

Configuring via Web-based Interface

Parameter

Description

Passthrough

Use Fax Passthrough

Move the switch to the right to enable the Fax Passthrough
mechanism. Do not disable the mechanism unless your ISP requires
this.

Use Modem

Passthrough

Move the switch to the right to enable the Modem Passthrough
mechanism. Do not disable the mechanism unless your ISP requires
this.

Payload type

Payload data type.

Codec type

From the drop-down list, select a codec for data transfer.

When all needed settings are configured, click the

APPLY

button.

Page

248

of 311

Summary of Contents for DVG-5402G
























































































































































































































































































































Search results

Summary of Contents for DVG-5402G

Reviews:

D-Link DVG-5402G, User Manual, Page: 248 / 311

Search results

Summary of Contents for DVG-5402G

Reviews: