D-Link DVG-5402G User Manual Download Page 278

Page: 278 / 311

DVG-5402G/GF

Wireless AC1200 MU-MIMO Dual Band

Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port

User Manual

Configuring via Web-based Interface

By default, in the

Remote server URL

field, the D-Link update server address

(

fwupdate.dlink.ru

) is specified. To add one more address, click the

ADD

button and enter

the address in the displayed line. To remove the address, click the

Delete

icon ( ) in the line of

the address.

Click the

APPLY SETTINGS

button.

You can update the firmware of the router locally (from the hard drive of your PC) or remotely
(from the update server).

Page

278

of 311

Summary of Contents for DVG-5402G
























































































































































































































































































































Search results

Summary of Contents for DVG-5402G

Reviews:

Related manuals for DVG-5402G

Brands by name

Popular brands

D-Link DVG-5402G, User Manual

Search results

Summary of Contents for DVG-5402G

Reviews:

Related manuals for DVG-5402G

Brands by name

Popular brands