DVG-5402G/GF
Wireless AC1200 MU-MIMO Dual Band
Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port
User Manual
Configuring via Web-based Interface
IPv6
Go to the
IPv6
tab to change or add the IPv6 address of the router, configure IPv6 addresses
assignment settings, specify MAC address and IPv6 address pairs, or add own DNS records.
Figure 98. Configuring the local interface. The
IPv6
tab. The
Local IPv6 Address
section.
To add an IPv6 address of the router, click the
ADD
button (
). To change the IPv6 address of
the router, select it in the table.
Figure 99. Configuring the local interface. The
IPv6
tab. The window for adding an IPv6 address.
In the opened window, you can specify the following parameters:
Parameter
Description
Local IPv6 Address
IPv6 address
The IPv6 address of the router in the local subnet.
Prefix
The length of the prefix subnet.
Gateway IPv6 address
Available if the
Access point
,
Repeater
, or
Client
mode was
selected in the Setup Wizard.
The gateway IPv6 address which is used by the router to connect to
the Internet (e.g., for synchronizing the system time with an NTP
server).
Optional
.
Click the
APPLY
button.
To remove the IPv6 address, select the checkbox located to the left of the relevant line in the table
and click the
DELETE
button (
). Then click the
APPLY
button. Also you can remove the IPv6
address in the editing window.
Page
120
of 311
