D-Link DVG-5402G User Manual Download Page 106

Page: 106 / 311

DVG-5402G/GF

Wireless AC1200 MU-MIMO Dual Band

Gigabit Router with Fiber WAN Port, 3G/LTE Support, 2 FXS
Ports, and USB Port

User Manual

Configuring via Web-based Interface

Parameter

Description

Obtain DNS server

addresses

automatically

Move the switch to the right to configure automatic assignment of
IPv6 DNS server addresses. Upon that the

Primary IPv6 DNS

server

and

Secondary IPv6 DNS server

fields are not available

for editing.

Primary IPv6 DNS

server/Secondary IPv6

DNS server

Enter addresses of the primary and secondary IPv6 DNS servers in
the relevant fields.

When all needed settings are configured, click the

APPLY

button.

Page

106

of 311

Summary of Contents for DVG-5402G
























































































































































































































































































































Search results

Summary of Contents for DVG-5402G

Reviews:

D-Link DVG-5402G, User Manual, Page: 106 / 311

Search results

Summary of Contents for DVG-5402G

Reviews: