Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 82
IPv6 Connection Type – PPPoE
In this section, the following parameters can be configured:
My IPv6 Connection is:
Select the IPv6 Internet connection type that will be used
by this router. Options to choose from are
Auto Detection
,
Static IPv6
,
Auto-
configuration (SLAAC/DHCPv6)
,
PPPoE
,
IPv6 in IP4 Tunnel
,
6to4
,
6rd
, and
Local Connectivity Only
. In this section we’ll discuss the
PPPoE
option.
In this section, the following parameters can be configured:
PPPoE Session:
Select the PPPoE session used here. To share this connection
with IPv4, select the
Share with IPv4
option. To create a new connection,
select the
Create a new session
option.
Address Mode:
Select the PPPoE address mode here. Options to choose from are
Dynamic IP
and
Static IP
.
IP Address:
After selecting the
Static IP
option as the address mode, enter the
static IPv6 address here.
User Name:
Enter the IPv6 PPPoE username here.
Password:
Enter the IPv6 PPPoE password here.
Verify Password:
Enter the IPv6 PPPoE password here again to verify.
Service Name:
Enter the service name here. This field is optional.
Reconnect Mode:
Select this reconnect mode here. Options to choose from are
Always on
,
On demand
, and
Manual
.
Maximum Idle Time:
Enter the maximum idle time value here.
MTU:
Enter the Maximum Transmission Unit (MTU) value here.
In this section, the following parameters can be configured:
Obtain IPv6 DNS Servers automatically:
Select this option to allow the router to
automatically obtain IPv6 DNS server IP addresses.
Use the following IPv6 DNS Server:
Select this option to manually enter the IPv6
DNS server IP addresses.
Primary DNS Server:
Enter the primary IPv6 DNS server address here.
Secondary DNS Server:
Enter the secondary IPv6 DNS server address here.
