D-Link DSL-2890AL User Manual Download Page 143

Page: 143 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 143

IPv6 Routing

To access the

IPv6 Routing

page, click on the

Advanced

menu link, at the top, and then click on the

IPv6 Routing

menu link, on the left.

On this page we can configure the IPv6 routing rules used by the router.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

In this section, the following parameters can be configured:

Checkbox:

Tick this option to enable the specified route.

Name:

Enter the name of the route here.

Metric:

Enter the metric value for this route here.

Interface:

Select the interface, associated with this route, here.

Destination IPv6 / Prefix Length:

Enter the destination IPv6 address and prefix

length value for the route here.

Gateway:

Enter the gateway IPv6 address for the route here.

Summary of Contents for DSL-2890AL



























































































































































































Search results

Summary of Contents for DSL-2890AL

Reviews:

Related manuals for DSL-2890AL

Brands by name

Popular brands

D-Link DSL-2890AL, User Manual

Search results

Summary of Contents for DSL-2890AL

Reviews:

Related manuals for DSL-2890AL

Brands by name

Popular brands