D-Link DSL-2890AL User Manual Download Page 125

Page: 125 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 125

Wi-Fi Protected Setup

To access the

Wi-Fi Protected Setup

page, click on the

Advanced

menu link, at the top, and then click on the

Wi-Fi Protected Setup

menu link, on the left.

On this page we can configure the Wi-Fi Protected Setup (WPS) settings on this
router.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

In this section, the following parameters can be configured:

Enable:

Tick this option to enable the Wi-Fi Protected Setup (WPS) feature.

WiFi Protected Setup:

Displays the status of the WPS feature.

Lock WPS-PIN Setup:

Tick this option to lock the WPS-PIN setup.

Summary of Contents for DSL-2890AL



























































































































































































Search results

Summary of Contents for DSL-2890AL

Reviews:

Related manuals for DSL-2890AL

Brands by name

Popular brands

D-Link DSL-2890AL, User Manual

Search results

Summary of Contents for DSL-2890AL

Reviews:

Related manuals for DSL-2890AL

Brands by name

Popular brands