D-Link DSL-2890AL User Manual Download Page 25

Page: 25 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 25

Internet Connection Setup Wizard

Click the

Internet Connection Setup Wizard

button to initiate the Internet

connection setup wizard.

After clicking the

Internet Connection Setup Wizard

button, the following page will

be available.

Welcome to the D-Link Internet Connection Setup Wizard

This wizard will guide user through a step-by-step wizard, divided into 4 steps, to
configure the Internet connectivity used by this router.

Click the

Next

button to continue to the next page.

Click the

Cancel

button to discard the changes made and return to the main page.

Summary of Contents for DSL-2890AL



























































































































































































Search results

Summary of Contents for DSL-2890AL

Reviews:

Related manuals for DSL-2890AL

Brands by name

Popular brands

D-Link DSL-2890AL, User Manual

Search results

Summary of Contents for DSL-2890AL

Reviews:

Related manuals for DSL-2890AL

Brands by name

Popular brands