D-Link DSL-2890AL User Manual Download Page 110

Page: 110 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 110

Access Control

To access the

Access Control

page, click on the

Advanced

menu link, at the top, and then click on the

Access Control

menu link, on the left.

On this page we can configure access control rules used by this router.

Click the

Save Settings

button to accept the changes made.

Click the

Don’t Save Settings

button to discard the changes made.

In this section, the following parameters can be configured:

Enable Access Control:

Tick this option to enable the access control feature.

Click the

Add Policy

button to initiate the access control rule addition wizard.

Summary of Contents for DSL-2890AL



























































































































































































Search results

Summary of Contents for DSL-2890AL

Reviews:

Related manuals for DSL-2890AL

Brands by name

Popular brands

D-Link DSL-2890AL, User Manual

Search results

Summary of Contents for DSL-2890AL

Reviews:

Related manuals for DSL-2890AL

Brands by name

Popular brands