D-Link DSL-2890AL User Manual Download Page 109

Page: 109 / 186

Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 109

In this section, the following parameters can be configured:

Configure MAC Filtering below:

Select the MAC filtering method here. Select the

Turn MAC Filtering OFF

option to disable this feature. Select the

Turn MAC

Filtering ON and ALLOW computers listed to access the network

option to

enable this feature and only allow the computers, by MAC address, to access
the network. Select the

Turn MAC Filtering ON and DENY computers listed

to access the network

option to enable this feature and only deny the

computers, by MAC address, access to the network.

Checkbox:

Tick this option to enable the rule.

MAC Address:

Enter the MAC address that will be filtered here.

DHCP Client List:

Select the DHCP client, from the drop-down menu, that will be

filtered here.

Schedule:

Select the time schedule option here. Customized time schedules can be created and used.

Summary of Contents for DSL-2890AL



























































































































































































Search results

Summary of Contents for DSL-2890AL

Reviews:

Related manuals for DSL-2890AL

Brands by name

Popular brands

D-Link DSL-2890AL, User Manual

Search results

Summary of Contents for DSL-2890AL

Reviews:

Related manuals for DSL-2890AL

Brands by name

Popular brands