Dual Band AC1750 Gigabit ADSL2+ Modem Router User Manual
Knowledge Base
Page 179
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP
address, please follow the steps below:
•
Click on the Windows
Start
button and navigate to the
Control Panel
>
Network and Sharing Center
and click on the
Change Adapter Settings
option on the left panel.
•
Right-click on the
Local Area Connection
, which represents your network
adapter, and select
Properties
.
•
Select the
Internet Protocol Version 4 (TCP/IPv4)
option and click on the
Properties
button.
•
Select
Use the following IP address
and enter an IP address that is on the
same subnet as your router. For example: If your router is running on the IP
address of
192.168.1.1
, use any IP address from
192.168.1.2
to
192.168.69.254
. Use the Subnet Mask of
255.255.255.0
. Set Default
Gateway the same as the LAN IP address of your router. Set Preferred DNS
server IP address the same as the LAN IP address of your router. The
Secondary DNS is not needed at this stage.
•
Click the
OK
button twice to return to the
Network Connections
window.
