D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 35
PPP over ATM (PPPoA)
Select the
PPP over ATM (PPPoA)
option, to use the PPPoA configuration as the
WAN service connection.
After selecting the
PPP over Ethernet (PPPoA)
option, the following information will
be available.
In this section we can configure the following parameters.
ATM Service:
Select the ATM Service option available here.
PPP Username:
Enter the PPPoA username used here.
PPP Password:
Enter the PPPoA password used here.
Service Name:
Enter the PPPoA service name used here.
Authentication Method:
Select the authentication method used for this interface.
Options to choose from are
AUTO
,
PAP
,
CHAP
, and
MSCHAP
.
NAT:
Select this option to enable or disable the NAT option.
Fullcone NAT:
Select this option to enable or disable the Fullcone NAT option.
Firewall:
Select this option enable or disable the firewall for this interface.
Dial on Demand with Idle Timeout Timer:
Select this option to enable or disable
dial on demand.
Inactivity Timeout (Minutes):
After selecting the
Dial on demand
option, this
parameter becomes available. Enter the inactivity timeout value used here.
PPP IP extension:
Select this option to enable or disable the PPP IP extension
option.
Use Static IPv4 Address:
Select this option to enable or disable the use of static IPv4 addresses.
IPv4 Address:
After enabling the
Use Static IPv4 Address
option we can enter the IPv4 address used here.
