D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
Web User Interface Configuration
Page 19
Step 3: Setup Internet connection
In this step, the user can configure the Internet connection settings used by this
router.
In this section we can configure the following parameters.
Country:
In this drop-down menu, the user can select one of two country options.
They are
Australia
and
New Zealand
. To manually configure this connection,
the user can choose the third option called
Other
.
Internet Service Provider:
After selecting a country, in the previous option, a list of
ISP connections will be available here. If your ISP is in the list, select it here
and the correct parameters will be entered for the rest of the page. However, if
your ISP is not listed here, you can choose the
Other
option.
Protocol:
Select the appropriate protocol to use here. Options to choose from are
PPPoE
,
PPPoA
, and
Bridge
.
Connection Type:
Select the appropriate connection type to use here. Options to
choose from are
VC-Mux
and
LLC.
VPI:
Enter the correct Virtual Path Identifier (VPI) value for your ISP here.
VCI:
Enter the correct Virtual Channel Identifier (VCI) value for your ISP here.
Username:
After choosing to use
PPPoE
or
PPPoA
this option will be available. Enter the ISP connection account username used here.
Password:
After choosing to use
PPPoE
or
PPPoA
this option will be available. Enter the ISP connection account password used here.
Confirm Password:
After choosing to use
PPPoE
or
PPPoA
this option will be available. Re-enter the ISP connection account username used here.
Click the
Back
button to discard the changes made and return to the previous page.
Click the
Next
button to continue to the next page.
Click the
Cancel
button to discard the changes made and return to the main page.
