D-Link DSL-2870B User Manual Download Page 121

Page: 121 / 184

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 121

Dynamic DNS

To access the

Dynamic DNS

page, click on the

Advanced

menu link, at the top, and then click on the

Dynamic DNS

menu link, on the left.

On this page the user can configure services related to the Dynamic DNS feature of
this product.

In this section a list of Dynamic DNS entries will be displayed.

Click the

Add

button to add a new entry.

Click the

Edit

button to reconfigure the entry.

Select the

Remove

option and click the

Remove

button to remove the specific entry.

After clicking the

Add

button, the following page is available.

Summary of Contents for DSL-2870B

























































































































































































Search results

Summary of Contents for DSL-2870B

Reviews:

Related manuals for DSL-2870B

Brands by name

Popular brands

D-Link DSL-2870B, User Manual

Search results

Summary of Contents for DSL-2870B

Reviews:

Related manuals for DSL-2870B

Brands by name

Popular brands