D-Link DSL-2870B User Manual Download Page 145

Page: 145 / 184

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual

Web User Interface Configuration

Page 145

Print Server

To access the

Print Server

page, click on the

Advanced

menu link, at the top, and then click on the

Print Server

menu link, on the left.

On this page the user can configure services related to the Print Server feature of this
product.

In this section we can configure the print server parameters for this router.

Print Server:

Select this option to enable or disable the print server feature.

Printer name:

Enter the printer name here.

Make and model:

Enter the printer’s make and model here.

Click the

Apply/Save

button to accept the changes made.

Summary of Contents for DSL-2870B

























































































































































































Search results

Summary of Contents for DSL-2870B

Reviews:

Related manuals for DSL-2870B

Brands by name

Popular brands

D-Link DSL-2870B, User Manual

Search results

Summary of Contents for DSL-2870B

Reviews:

Related manuals for DSL-2870B

Brands by name

Popular brands