DSA-6100 User Guide
72
General
Subnet Mask:
The default is 255.255.255.0. All devices in the network must share the same subnet mask.
Default Gateway:
The default is 192.168.1.1. Enter the gateway IP address for the network, typically a router.
SNTP/NTP:
The time server IP address, time zone, and the local time will be displayed.
¾
Time Zone:
Select your time zone from the drop-down menu.
¾
Server IP:
Enter the IP address of a SNTP/NTP server.
¾
Daylight Saving Time:
Check the box to enable daylight saving time.
SNMP
¾
Public Community:
When enabled, change the Public Community Name here.
¾
Private Community:
When enabled, change the Private Community Name here.
Syslog
¾
System Activity:
Select “Enable” to allow the logging of system actions, such as logging a firmware
upgrade.
¾
Wireless Activity:
Select “Enable” to allow the logging of any wireless clients that connect to the AP.
¾
Notice:
Select “Enable” to allow all other information to be logged.
¾
Remote Syslog Server:
If you require more space to hold your logs, please provide the IP address of the
Server. The embedded memory can only have up to 300 logs.
SMTP
¾
SMTP Server IP:
IP address of SMTP Server
¾
SMTP Sender:
The sender’s Email address
¾
SMTP Recipient:
The receiver’s Email address
Wireless
802.11a Basic Settings / 802.11g Basic Settings:
¾
Super Mode A/G Mode:
Select either
Disabled
,
Super A without Turbo
,
Super G without Turbo
or
Super G with Dynamic Turbo
. When Multi-SSID is selected as enabled, the item Super Mode cannot be
active. Super G Mode can only be changed when Multi-SSID is disabled.
o
Disabled:
Standard 802.11a/g support, no enhanced capability.
o
Super A/G without Turbo:
Capable of Packet Bursting, FastFrames, Compression, and no Turbo
mode.
o
Super G with Dynamic Turbo:
Dynamic Turbo Mode is only enabled when all devices on the wireless
