D-Link DSA-6100 User Manual Download

Page: 142 / 188

DSA-6100 User Guide

136

Syslog Server- Traffic History

The IP address and port number of the external Syslog

Server.

N/A

means that it is not configured.

Proxy Server

Enabled/disabled indicates whether the system is

currently using a proxy server.

Friendly Logout

Enabled/disabled indicates whether a logout confirmation

message has been set for display when users click the

logout button.

Internet Connection Detection

Show a warning message when Internet connection is

down.

WAN Failover

Show WAN1 and WAN2 status when WAN Failover is

enabled.

Remote Management IP

The IP addresses of remote computers that are allowed to

access the management interface.

Management

SNMP

Enabled/disabled indicates the current status of the SNMP

management function.

Retainable Days

The maximum number of days for the system to retain the

users’ traffic information.

History

Traffic log Email To

The email address that the traffic history information will

be sent to.

NTP Server

The network time server that the system is set to align.

Time

Date Time

The system time is shown as the local time.

Idle Timer

The number of minutes allowed for the users to be

inactive.

Multiple Login

Enabled/Disabled indicates whether the current setting

allow/disallow multiple logins from the same account.

User

Guest Account

Enabled/Disabled indicates whether the current status

allows Guest Accounts log in.

Preferred DNS Server

IP address of the preferred DNS Server.

DNS

Alternate DNS Server

IP address of the alternate DNS Server.

Server Status

The current status of the PMS server.

PMS

IP:Port

The IP and Port information of the PMS server.

Syslog Server

Shows Disabled or Enable the IP address and port

number of the Syslog Server in Session Log.

Email To

The email address of the receiver.

Session Log

FTP Server

Shows Disabled or Enabled the IP address and port

number of the FTP Server in Session Log.

Summary of Contents for DSA-6100





























































































































































































Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands

D-Link DSA-6100, User Manual

Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands