D-Link DSA-6100 User Manual Download

Page: 53 / 188

Chapter 4. Web Interface Configuration

4.2.6 Dynamic DNS

The DSA-6100 provides a convenient dynamic DNS (DDNS) function to translate the IP address of the WAN port

to a domain name that helps administrators easily memorize and connect to the WAN port. When the DHCP is

activated at WAN port, this function will also update the newest IP address regularly to the DNS server if the WAN1

interface is set to Dynamic. These settings will become effective immediately after clicking

Apply

DDNS:

Dynamic DNS, choose to enable or disable of this function.

Provider:

Select the dynamic DNS service provider.

Host name:

The IP address/domain name of the WAN port.

Username/E-mail:

The register ID (username or e-mail) for the dynamic DNS service provider.

Password/Key:

The register password for the dynamic service DNS provider.

Please click

Apply

and these settings will become effective immediately.

Summary of Contents for DSA-6100





























































































































































































Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands

D-Link DSA-6100, User Manual

Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands