D-Link DSA-6100 User Manual Download

Page: 82 / 188

DSA-6100 User Guide

4.3.5 Firmware Management

This is where AP’s firmware can be uploaded. The current firmware can also be downloaded to the local storage if

required.

The system supports the firmware management of APs to upload new firmware, delete the existing firmware, and

download the firmware to managed APs. Note that the AP’s firmware version must be one that has been

integrated.

File Name:

The name of the AP firmware to be uploaded.

Upload:

Click

Upload

button to upload the file from a local disk to the system.

List:

All uploaded firmware will be listed here.

Checksum:

The automatically detected security identification of the firmware.

AP Type:

The AP type of the firmware.

Version:

The version of the firmware.

Size:

The file size of the firmware.

Download:

Click Download to save the selected firmware to local disk.

Delete:

Can be clicked to delete the current firmware.

Summary of Contents for DSA-6100





























































































































































































Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands

D-Link DSA-6100, User Manual

Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands