D-Link DSA-6100 User Manual Download

Page: 41 / 188

Chapter 4. Web Interface Configuration

4.1.6 LAN2 Configuration

By default, users on the LAN2 interface are not required to log in before accessing the network, but administrator

can enable the user authentication based upon actual network deployment requirements. Please refer to the

previous section “LAN1 Configuration” for details about the similar configuration of LAN2 port.

LAN2:

These are the basic, global configuration options for LAN2 port.

DHCP Server Configuration:

DHCP options for LAN2 port include Disable, DHCP, and Relay.

VLAN:

To activate the VLAN interfaces for LAN2 port, please check “

Activate VLAN and Edit VLAN List

”.

Thereafter, on the VLAN List, 32 VLANs can be edited accordingly.

Summary of Contents for DSA-6100





























































































































































































Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands

D-Link DSA-6100, User Manual

Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands