D-Link DSA-6100 User Manual Download

Page: 32 / 188

DSA-6100 User Guide

4.1.2 System Information

The system and network related parameters such as System Name, Device Name, Homepage Redirect URL,

Management IP Address List, and User Logon SSL can be configured from the menu as shown below.

System Name:

The name of this system. Set the system’s name or use the default.

Device Name:

FQDN (Fully-Qualified Domain Name). This is the domain name used in login page. For

example, if Device Name is dlink.com, the URL of login page will be https://dlink.com/loginpages/login.shtml.

Home Page:

Enter the website of a Web Server to be the homepage. User will be directed to this webpage

after successful login. Usually, the homepage is the company’s website, such as http://www.dlink.com.

Regardless of the original webpage set in the users’ computer, they will be redirected to this page after login.

Remote Management IP:

Set the IP Address or the IP Subnet with a system which is able to connect to the

web management interface via the authenticated port. For example: 10.2.3.0/24 means that as long as an

administrator is within the IP address range of 10.2.3.0/24, he or she can reach the administration page of the

DSA-6100. If the administrator configures a single IP, such as 10.2.3.5, only this IP address can reach the

administration page.

SNMP:

Configure IP address and Community ID of external SNMP management device. This system supports

SNMP v.3.

User Logon SSL:

Enable SSL, HTTPS or disable HTTP when user login with encryption to have a safer login

process.

System Time:

DSA-6100 supports NTP communication protocol to synchronize the network time. Please

specify the IP address of a server and select the desired time zone in the system configuration interface for

adjusting the time automatically. (Universal Time is Greenwich Mean Time, GMT). Time can also be set

manually when by selecting

“Set Device Date and Time”

. Please enter the date and time for these fields.

History Report Interval:

Time interval to update length of minutes that traffic log in the Traffic History page will

be updated by the unit.

Summary of Contents for DSA-6100





























































































































































































Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands

D-Link DSA-6100, User Manual

Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands