D-Link DSA-6100 User Manual Download

Page: 88 / 188

DSA-6100 User Guide

Click

Apply

to complete adding the user or users

Import User:

Click this to enter the

Upload User

interface. Click the

Browse

button to select the text file for

the user account upload. Then click

Submit

to complete the upload process.

The uploading file should be a text file and the format of each line is

"ID, Password, MAC, Policy, Remark"

“ID, Password, MAC, Max bandwidth, Request bandwidth, Policy, Remark”

without the quotes. There

must be no spaces between the fields and commas. The MAC field can be omitted, but the trailing comma

must be retained. When adding user accounts by uploading a file, the existing accounts in the embedded

database will not be replaced by new ones.

Summary of Contents for DSA-6100





























































































































































































Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands

D-Link DSA-6100, User Manual

Search results

Summary of Contents for DSA-6100

Reviews:

Related manuals for DSA-6100

Brands by name

Popular brands