D-Link DIR-868L User Manual Download Page 9

Page: 9 / 173

D-Link DIR-860L User Manual

Section 1 - Product Overview

Hardware Overview

Connections

USB Port

Connect a USB flash drive to share content throughout your network.

WPS Button

Press to start the WPS process. The Power LED will blink during this process.

LAN Ports (1-4)

Connect 10/100/1000 Ethernet devices such as computers, switches, storage (NAS) devices, and game consoles.

Internet Port

Using an Ethernet cable, connect your broadband modem to this port.

Power Button

Press the power button to power on and off.

Power Receptor

Receptor for the supplied power adapter.

Reset Button

Press and hold the reset button with a paper clip for 10 seconds to reset the router to the default factory settings.

Summary of Contents for DIR-868L














































































































































































Search results

Summary of Contents for DIR-868L

Reviews:

Related manuals for DIR-868L

Brands by name

Popular brands

D-Link DIR-868L, User Manual

Search results

Summary of Contents for DIR-868L

Reviews:

Related manuals for DIR-868L

Brands by name

Popular brands