D-Link DIR-868L User Manual Download Page 67

Page: 67 / 173

D-Link DIR-860L User Manual

Section 3 - Configuration

However, if the automatic detection fails, the user will be prompt to either

Try

again

or to click on the

Guide me through the IPv6 settings

button to initiate the

manual continual of the wizard.

There are several connection types to choose from. If you are unsure of your

connection method, please contact your IPv6 Internet Service Provider.

Note:

If using the PPPoE option, you will need to ensure that any PPPoE client

software on your computers has been removed or disabled. The three options

available on this page are

IPv6 over PPPoE, Static IPv6 address and Route

, and

Tunneling Connection (6rd)

Choose the required IPv6 Internet Connection type and click on the

Next

button

to continue. Click on the

Prev

button to return to the previous page. Click on the

Cancel

button to discard all the changes made and return to the main page.

Summary of Contents for DIR-868L














































































































































































Search results

Summary of Contents for DIR-868L

Reviews:

Related manuals for DIR-868L

Brands by name

Popular brands

D-Link DIR-868L, User Manual

Search results

Summary of Contents for DIR-868L

Reviews:

Related manuals for DIR-868L

Brands by name

Popular brands