69
D-Link DIR-860L User Manual
Section 3 - Configuration
PPPoE
Select
PPPoE
from the drop-down menu.
Enter the PPPoE account settings supplied by your Internet
provider (ISP).
Select
Create a new session
if you have IPv6.
Select
Static IP
if your ISP assigned you the IP address, subnet
mask, gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Enter the IP address (Static PPPoE only).
Enter your PPPoE username.
Enter your PPPoE password and then retype the password in the
next box.
Enter the ISP Service Name (optional).
Select either
Always-on
,
On-Demand
, or
Manual
.
Enter a maximum idle time during which the Internet connection
is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your specific ISP. 1492 is the default MTU.
Select either
Obtain IPv6 DNS servers automatically
or
Use the
following IPv6 DNS Servers
Enter the primary and secondary DNS server addresses.
My IPv6 Connection is:
PPPoE Internet Connection
Type:
PPPoE Session:
Address Mode:
IP Address:
User Name:
Password:
Service Name:
Reconnect Mode:
Maximum Idle Time:
MTU:
IPv6 DNS Settings:
Primary/Secondary DNS
Servers:
