D-Link DIR-868L User Manual Download Page 98

Page: 98 / 173

D-Link DIR-860L User Manual

Section 3 - Configuration

To use the Universal Plug and Play (UPnP

™

) feature check

the box. UPnP provides compatibility with networking

equipment, software and peripherals.

Checking the box will allow the DIR-860L to respond

to pings. Unchecking the box may provide some extra

security from hackers.

You may set the port speed of the Internet port to 10Mbps,

100Mbps, 1000Mbps, or Auto (recommended).

Check the box to allow multicast traffic to pass through

the router from the Internet (IPv4).

Check the box to allow multicast traffic to pass through

the router from the Internet (IPv6).

Enable UPnP IGD:

Enable WAN Ping

Response:

WAN Port Speed:

Enable IPV4

Multicast Streams:

Enable IPV6

Multicast Streams:

Advanced Network Settings

Summary of Contents for DIR-868L














































































































































































Search results

Summary of Contents for DIR-868L

Reviews:

Related manuals for DIR-868L

Brands by name

Popular brands

D-Link DIR-868L, User Manual

Search results

Summary of Contents for DIR-868L

Reviews:

Related manuals for DIR-868L

Brands by name

Popular brands