80
D-Link DIR-860L User Manual
Section 3 - Configuration
The QoS Engine supports overlaps between rules, where more than one rule can match for a specific message flow. If more than one
rule is found to match the rule with the highest priority will be used.
Create a name for the rule that is meaningful to you.
The priority of the message flow is entered here -- 1 receives the highest priority (most urgent) and 255 receives the lowest priority
(least urgent).
The protocol used by the messages.
The rule applies to a flow of messages whose LAN-side IP address falls within the range set here.
The rule applies to a flow of messages whose WAN-side IP address falls within the range set here.
Select a service or port you want to assign to this rule.
Classification
Rules:
Name:
Queue ID:
Protocol:
Local IP Range:
Remote IP
Range:
Application Port:
After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that
require the use of traffic control and data priority manipulation.
Click on the
Save Settings
button to accept the changes made or click on the
Don’t Save Settings
button to discard the
changes made.
