D-Link DIR-868L User Manual Download Page 11

Page: 11 / 173

D-Link DIR-860L User Manual

Section 2 - Installation

Before you Begin

Installation

This section will walk you through the installation process. Placement of the router is very important. Do not place the router

in an enclosed area such as a closet, cabinet, or in the attic or garage.

• Please configure the router with the computer that was last connected directly to your modem.
•

Users with DSL providers

- If you are using a PPPoE connection, you will need your PPPoE user name and password.

If you do not have this information, contact your Internet provider. Do not proceed until you have this information.

•

Users with Cable providers

- Make sure you unplug the power to your modem. In some cases, you may need to turn

it off for up to 5 minutes.

•

Advanced Users

- If your ISP provided you with a modem/router combo, you will need to set it to “bridge” mode so

the DIR-860L router can work properly. Please contact your ISP or refer to the user manual for your modem/router

device.

Summary of Contents for DIR-868L














































































































































































Search results

Summary of Contents for DIR-868L

Reviews:

Related manuals for DIR-868L

Brands by name

Popular brands

D-Link DIR-868L, User Manual

Search results

Summary of Contents for DIR-868L

Reviews:

Related manuals for DIR-868L

Brands by name

Popular brands