D-Link DIR-868L User Manual Download Page 153

Page: 153 / 173

148

D-Link DIR-860L User Manual

Appendix D - Contacting Technical Support

Contacting Technical Support

U.S. and Canadian customers can contact D-Link technical support through our web site or by phone.

Before you contact technical support, please have the following ready:

• Model number of the product (e.g. DIR-860L)

• Hardware Revision (located on the label on the bottom of the router (e.g. rev A1))

• Serial Number (s/n number located on the label on the bottom of the router).

You can find software updates and user documentation on the D-Link website as well as frequently asked questions and

answers to technical issues.

For customers within the United States:

Phone Support:

(877) 453-5465

Internet Support:

http://support.dlink.com

For customers within Canada:

Phone Support:

(800) 361-5265

Internet Support:

http://support.dlink.ca

Summary of Contents for DIR-868L














































































































































































Search results

Summary of Contents for DIR-868L

Reviews:

Related manuals for DIR-868L

Brands by name

Popular brands

D-Link DIR-868L, User Manual

Search results

Summary of Contents for DIR-868L

Reviews:

Related manuals for DIR-868L

Brands by name

Popular brands