DGS-6604
m
show ipv6 rip database
CLI Reference Guide
719
show ipv6 rip database
To display information about current IPv6 RIP processes, use the
show ipv6 rip
database
command.
show ipv6 rip database
Default
None
Command Mode
User EXEC
Usage Guideline
The information displayed by the
show ipv6 rip database
command is useful
when debugging RIPng routing operations.
Examples
The following is sample output from the
show ipv6 rip database
command.
The result after executing this command is as follows.
Syntax Description
database
If specified the command displays the details of the entries in the specified RIP
IPv6 routing table.
Switch > enable
Switch # show ipv6 rip database
Codes: R - RIP, Rc - RIP connected, Rs - RIP static,
K - Kernel, C - Connected, S - Static, O - OSPF, I - IS-IS, B - BGP
Network Next Hop If Met Time
R 3ffe:1::/64 fe80::219:5bff:fef5:2cc1 vlan2 2
0DT0H2M31S
R 3ffe:2::/64 fe80::219:5bff:fef5:2cc1 vlan2 2
0DT0H2M31S
Rc 3ffe:3::/64 :: vlan3 1
Rc 3ffe:4::/64 :: vlan2 1
Total Entries: 4 entries, 4 routes
Summary of Contents for DGS-6600-48TS
Page 1: ...0 9 3...
