DGS-6604
ipv6 neighbor
CLI Reference Guide
350
ipv6 neighbor
This command is used to add a static ipv6 neighbor entry. The no form of this
command deletes the IPv6 neighbor entry.
ipv6 neighbor X:X::X:X IFNAME MAC
no ipv6 neighbor X:X::X:X IFNAME
Default
None
Command Mode
Global configuration.
Usage Guideline
None
Example
This example shows how to configure an IPv6 neighbor entry:
Syntax Description
X:X::X:X
IPv6 address. This argument must be in the form documented by RFC2373
where the address is specified in hexadecimal using a 16-bit value between
colons.
XXXX: IPv6 address
IFNAME
The IP Interface name
MAC
The MAC address, in XX-XX-XX-XX-XX-XX format
Switch > enable
Switch # configure terminal
Switch (config) # ipv6 neighbor fe80::1 vlan1 00-01-80-11-22-99
Switch (config) #
Summary of Contents for DGS-6600-48TS
Page 1: ...0 9 3...
