DGS-6604
ip igmp version
CLI Reference Guide
280
ip igmp version
Use this command to change the IGMP version on the specified interface.
ip igmp version {1|2|3}
Default
3
Command Mode
VLAN interface configuration
Usage Guideline
If the IGMP interface version is configured to a lower version, then the higher
version IGMP Report/Leave messages are ignored.
This version will apply to both IGMP and IGMP snooping operation.
Example
This example shows how to configure IGMP version. It configures the IGMP
version to 3.
Verify the settings by entering the
show ip igmp interface
command.
Syntax Description
1
Configure the Switch to run IGMP version 1.
2
Configure the Switch to run IGMP version 2.
3
Configure the Switch to run IGMP version 3.
Switch# configure terminal
Switch(config)# interface vlan1000
Switch(config-if)# ip igmp version 3
Switch(config-if)# end
Summary of Contents for DGS-6600-48TS
Page 1: ...0 9 3...
