DGS-6604
m
show ip igmp snooping
CLI Reference Guide
646
Display Field
Descriptions
The following table shows the field information for the above example.
Display Field
Parameter
Description
Querier state
Enabled
IGMP Snooping querier is enabled.
Disabled
IGMP Snooping querier is disabled.
Querier Router
Active
This VLAN interface of the switch works as an IGMP
snooping querier.
Non-active
This VLAN interface does not function as an IGMP
snooping querier.
-
This field can be disregarded when the IGMP snooping
querier state is disabled.
Immediate Leave
Enable
IGMP Snooping immediate leave response function is
enabled which means the member port of the VLAN
interface will receive any IGMP leave message from a
port, the system will immediately remove the port from
the multicast group membership.
Disable
IGMP Snooping immediate leave response function is
disabled which means the member port of the VLAN
interface will receive the IGMP leave message, the
system will not remove the port from the multicast
group membership, instead the system will follow
IGMP interaction process to confirm the multicast
membership.
Host Compatibility
Mode
IGMPv1
IGMPv2
IGMPv3
The current compatibility state of this interface. This
state is dependent on the version of general queries
received from the interface. IGMPv3 is the default
value. If any lower version is received, the version will
go back to the lowest version for backward
compatibility.
Timer State
-
The timer stops counting down.
[n]DT[n]H[n]M[n]S
Timer starts to count down, and its initial count is set to
the value got from the Older Version Querier Present
Timeout in the IGMP control packet.
Summary of Contents for DGS-6600-48TS
Page 1: ...0 9 3...
