DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
50
sFlow Counter Poller Settings
This window is used to create the sflow counter poller settings on the Switch. Within the sflow counter poller function,
the port statistics counter information will be forwarded to the server at the configured interval. These counters are
RFC 2233 counters.
To view this window, click
Configuration > sFlow > sFlow Counter Poller Settings
as shown below:
Figure 2 - 58 sFlow Counter Poller Settings window
The following parameters can be configured:
Parameter Description
From Port / To Port
Specifies the port or list of ports to be configured.
Analyzer Server ID
(1-4)
The analyzer server id specifies the ID of a server analyzer where the packet will be
forwarded.
Interval (20-120)
Specifies the maximum number of seconds between successive statistic counter information.
To disable the interval check the
Disabled
box.
Click
Apply
to implement the changes made.
