DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
243
Show VLAN Ports
This window allows the VLAN status for each of the Switch's ports to be viewed by VLAN. Enter a VID (VLAN ID) in
the field at the top of the window and click the
Find
button.
To view this window, click
Monitoring
> VLAN > Show
VLAN Ports
as shown below:
Figure 7 - 29 Show VLAN Ports window
IGMP Snooping
The following windows are used to configure the IGMP Snooping settings of the Switch.
Browse IGMP Router Port
This window displays which of the Switch’s ports are currently configured as router ports. A router port configured by a
user (using the console or Web-based management interfaces) is displayed as a static router port, designated by S. A
router port that is dynamically configured by the Switch is designated by D, while a Forbidden port is designated by F.
Enter a VID (VLAN ID) in the field at the top of the window and click the
Find
button.
To view this window, click
Monitoring
> IGMP Snooping >
Browse IGMP
Router Port
as shown below:
Figure 7 - 30 Browse IGMP Router Port window
IGMP Snooping Group
This window allows the Switch’s IGMP Snooping Group Table to be viewed. IGMP Snooping allows the Switch to read
the Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch.
The number of IGMP reports that were snooped is displayed in the Reports
field.
To view this window, click
Monitoring
> IGMP Snooping >
IGMP Snooping Group
as shown below:
