DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
27
DHCP Relay Option 60 Settings
This window is used to configure option 60 relay rules on the Switch. Different strings can be specified for the same
relay server, and the same string can be specified with multiple relay servers. The system will relay the packet to all
the matching servers.
To view this window, click
Configuration > DHCP Relay > DHCP Relay Option 60 Settings
as shown below:
Figure 2 - 24 DHCP Relay Option 60 Settings window
The following parameters may be configured:
Parameter Description
String
Enter the specified string, up to a maximum of 255 alphanumeric characters.
Server IP
Enter the relay server IP address.
Match Type
Use the drop down menu to select either
Exact Match
or
Partial Match
.
Exact Match
– The option 60 string in the packet must fully match the specified string.
Partial Match
– The option 60 string in the packet only needs to partially match the specified
string.
Click
Add
to add a new entry. To search for a particular entry enter the correct
IP Address
or
String
and click
Find
. To
delete an entry select it and click
Delete
.
DHCP Relay Option 61 Default Settings
This window is used to configure the DHCP Relay Option 61 Default Settings. These settings are used to determine
the rule to process those packets that have no option 61 matching rules.
To view this window, click
Configuration > DHCP Relay > DHCP Relay Option 61 Default Settings
as shown
below:
Figure 2 - 25 DHCP Relay Option 61 Default Settings window
The following parameters may be configured:
Parameter Description
DHCP Relay Option
61 Default
Use the pull down menu to choose either
Relay
or
Drop
. When drop is specified, the packet
with no matching rules found will be dropped without further process. When relay is selected
the packet will be relayed based on the relay rules.
Enter the IP Address of the entry you wish to configure.
Click
Apply
to implement changes made.
