DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
44
Password
Enter a Password when SNMP V3 Encryption is enabled for Password mode.
Key
Enter a Key when SNMP V3 Encryption is enabled for Key mode.
To implement changes made, click
Apply
. To delete an existing
SNMP User Table
entry, click the corresponding
Delete
button.
SNMP Community Table
Use this table to view existing SNMP Community Table configurations and to create a SNMP community string to
define the relationship between the SNMP manager and an agent. The community string acts like a password to
permit access to the agent on the Switch. One or more of the following characteristics can be associated with the
community string:
•
An Access List of IP addresses of SNMP managers that are permitted to use the community string to gain
access to the Switch's SNMP agent.
•
Any MIB view that defines the subset of all MIB objects will be accessible to the SNMP community.
•
Read/write or read-only level permission for the MIB objects accessible to the SNMP community.
To view this window, click
Configuration > SNMP Settings > SNMP Community Table
as shown below:
Figure 2 - 49 SNMP Community Table window
The following parameters can set:
Parameter
Description
Community Name
Type an alphanumeric string of up to 32 characters that is used to identify members of an
SNMP community. This string is used like a password to give remote SNMP managers
access to MIB objects in the Switch's SNMP agent.
View Name
Type an alphanumeric string of up to 32 characters that is used to identify the group of MIB
objects that a remote SNMP manager is allowed to access on the Switch. The view name
must exist in the SNMP View Table.
Access Right
Read Only
– Specifies that SNMP community members using the community string created
can only read the contents of the MIBs on the Switch.
Read Write
– Specifies that SNMP community members using the community string created
can read from, and write to the contents of the MIBs on the Switch.
To implement the new settings, click
Apply
. To delete an entry from the
SNMP Community Table
, click the
corresponding
Delete
button.
