DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
125
Figure 3 - 81 CFM MIPCCM List window
Connectivity Fault Management Settings
This window is used to configure the CFM settings on the Switch.
To view this window, click
L2 Features
> CFM > Connectivity Fault Management Settings
as shown below:
Figure 3 - 82 Connectivity Fault Management Settings window
The following parameters can be set or are displayed:
Parameter Description
CFM State
Used to
Enable
or
Disable
the CFM State.
Connectivity Fault Management Create(MD)
MD
Enter the maintenance domain name you wish to create.
Level
Enter the maintenance domain level.
Connectivity Fault Management Settings(MD)
MD
Enter the maintenance domain name you wish to configure.
