DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
201
Precedence bits field in IPv4.
Rx Rate (1-15624)
Use this to limit Rx bandwidth for the profile being configured. This rate is implemented
using the following equation: 1 value = 64Kbit/sec. (ex. If the user selects an Rx rate of
10
then the ingress rate is 640Kbit/sec.) The user many select a value between
1
and
15624
or
tick the No Limit check box. The default setting is No Limit.
Time Range Name
Tick the check box and enter the name of the Time Range settings that has been previously
configured in the
Time Range
Settings
window. This will set specific times when this
access rule will be implemented on the Switch.
Counter
Enable or disable the counter settings.
Ports
Specifies that the access rule will take effect on one port or a range of ports.
VLAN Name
Specifies the access rule will take effect on the VLAN Name specified.
VLAN ID
Specifies the access rule will take effect on the VLAN ID specified.
Click
Apply
to display the following
Access Rule List
window.
Figure 6 - 20 Access Rule List (IPv6)
To view the configurations for previously configured rule click on the corresponding
Show Details
Button which will
display the following
Access Rule Details
window.
Figure 6 - 21 Access Rule Detail Inforamtion (IPv6)
To configure the
Packet Content ACL
select Packet Content in the Add ACL Profile window, enter the Profile ID and
Profile Name into the top half of the screen in the
Add ACL Profile
window and click
Select,
the following window will
appear.
