D-Link DFL- 2500 Cli Reference Manual Download Page 173

Page: 173 / 213

3.48. RemoteManagement

This is a category that groups the following object types.

3.48.1. RemoteMgmtHTTP

Description

Configure HTTP/HTTPS management to enable remote management to the system.

Properties

Name

Specifies a symbolic name for the object. (Identifier)

Interface

Specifies the interface for which remote access is granted.

AccessLevel

The access level to grant the user that logs in. (Default: Admin)

LocalUserDatabase

Specifies the local user database to use for login.

HTTP

Enable remote management via HTTP. (Default: No)

HTTPS

Enable remote management via HTTPS. (Default: No)

Network

Specifies the network for which remote access is granted.

Comments

Text describing the current object. (Optional)

3.48.2. RemoteMgmtNetcon

Description

Configure Netcon management to enable remote management to the system.

Properties

Name

Specifies a symbolic name for the object. (Default: NetconMgmt)

Interface

Specifies the interface for which remote access is granted.

Mode

Configure, Console or Uptimepoll. (Default: Configure)

IdleTimeout

Number of seconds of inactivity until the Netcon console user is automatically
logged out. (Default: 900)

Key

64 byte Netcon PSK.

Network

Specifies the network for which remote access is granted.

Comments

Text describing the current object. (Optional)

3.48. RemoteManagement

Chapter 3. Configuration Reference

173

Summary of Contents for DFL- 2500






















































































































































































































Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands

D-Link DFL- 2500, Cli Reference Manual

Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands