D-Link DFL- 2500 Cli Reference Manual Download Page 132

Page: 132 / 213

3.28. IGMPSetting

Description

IGMP parameters can be tuned for one, or a group of interfaces in order to match the characteristics
of a network.

Properties

Name

Specifies a symbolic name for the object. (Identifier)

Interface

The interfaces that these settings should apply to.

RobustnessVariable

IGMP is robust to (Robustness Variable - 1) packet losses.
(Default: 2)

MaxRequestsPerSecond

Maximum number of IGMP requests to process each second
and interface. (Default: 100)

RouterVersion

Multiple IGMP querying routers on a network must use the
same IGMP version. (Default: IGMPv3)

LowestCompatibleVersion

The lowest IGMP version to allow on incoming requests.
(Default: IGMPv1)

QueryInterval

The interval between general queries sent by the security
gateway. (Default: 125000)

QueryResponseInterval

The maximum time until a host (client) has to send an answer
to a query. (Default: 10000)

LastMemberQueryInterval

The maximum time until a host (client) has to send an answer
to a group and group-and-source specific query. (Default:
10000)

LastMemberQueryCount

The number of group and group-and-source specific queries
sent until the security gateway decides there are no more sub-
scribers to a specific multicast group. (Default: 2)

StartupQueryInterval

The general query interval to use during the startup phase.
(Default: 30000)

StartupQueryCount

The number of startup queries to send during the startup
phase. (Default: 2)

UnsolicatedReportInterval

The time between repetitions of a host's initial membership
reports to a group. (Default: 1000)

ReactToOwnQueries

Should the system respond to Member Report Queries orgin-
ating from itself. (Default: No)

Comments

Text describing the current object. (Optional)

3.28. IGMPSetting

Chapter 3. Configuration Reference

132

Summary of Contents for DFL- 2500






















































































































































































































Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands

D-Link DFL- 2500, Cli Reference Manual

Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands