D-Link DFL- 2500 Cli Reference Manual Download Page 96

Page: 96 / 213

VerifySenderEmail

Check emails for mismatching SMTP command From ad-
dress and email header From address. (Default: No)

VerifySenderEmailAction

TODO. (Default: Deny)

VerifySenderEmailDomainOnly

Only check domain names in email From addresses. (Default:
No)

MaxEmailPerMinute

Specifies the maximum amount of emails per minute from the
same host. (Optional)

MaxEmailSize

Specifies the maximum allowed email size in kB. (Optional)

FileListType

Specifies if the file list contains files to allow or deny.
(Default: Block)

FailModeBehavior

Standard behaviour on error: Allow or Deny. (Default: Deny)

File

List of file types to allow or deny. (Optional)

VerifyContentMimetype

Verify that file extentions correspond to the MIME type.
(Default: No)

Antivirus

Disabled, Audit or Protect. (Default: Disabled)

ScanExclude

List of files to exclude from antivirus scanning. (Optional)

CompressionRatio

A compression ratio higher than this value will trigger the ac-
tion in Compression Ratio Action, a value of zero will disable
all compression checks. (Default: 20)

CompressionRatioAction

The action to take when high compression threshold is viol-
ated, all actions are logged. (Default: Drop)

AllowEncryptedZip

Allow encrypted zip files, even though the contents can not
be scanned. (Default: No)

ZDEnabled

Enable ZoneDefense Block. (Default: No)

ZDNetwork

Hosts within this network will be blocked at switches if a vir-
us is found.

DNSBL

Disable or Enable DNSBL. (Default: No)

SpamThreshold

Spam Threshold defines when an email should be considered
as Spam. (Default: 10)

DropThreshold

Drop Threshold defines when an email should be considered
malicious and be dropped. (Default: 20)

SpamTag

Spam Tag that is inserted into the subject for an email con-
sidered as Spam or malicious. (Default: "*** SPAM ***")

ForwardBlockedMail

Forward blocked mails to DropAddress. (Default: No)

DropAddress

Email address that emails reaching the drop threshold will be
rerouted to.

AppendTXT

Use TXT records (will only be used if reaching the drop
threshold). (Default: No)

CacheSize

Size of the IP Cache of checked sender IP addresses.
(Default: 0)

3.4.7. ALG_SMTP

Chapter 3. Configuration Reference

Summary of Contents for DFL- 2500






















































































































































































































Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands

D-Link DFL- 2500, Cli Reference Manual

Search results

Summary of Contents for DFL- 2500

Reviews:

Related manuals for DFL- 2500

Brands by name

Popular brands